+39 0423 783720 info@g3sistemi.com

Manifolds for heating and cooling DN 32

These manifolds for heating and cooling systems derive from an SAE 304 stainless steel bar with a diameter of Ø 1 “1/4 with thickness of 1.5 mm. They are also equipped with attacks Ø 3 / 4″ M Euroconus that makes the devices  able to connect to the totality of pipes available .

The side connections has a diameter of Ø1″ F, which can be combined with a  compression fitting of diameter Ø1” otherwise it can be connected with a kit composed by a shut-off valve and thermometer.

G3 Manifolds for heating and cooling DN 32 are available in two versions: one with thermostatic bonnet on the back flux and with micrometric flow meter on the delivery flow in order to  made possible fine adjustments and high precision.

The second version available has  a thermostatic bonnet on the back flux  and holder adjustment on the delivery flow.

These distributions manifold are extremely accurate and extremely adaptable to customer needs. The number of routes and their size can be changed and are supplied pre-assembled in order to give possibility to be installed in any system of heating or cooling, in radiant heating floor systems as well as for radiator systems and fan coils;

Manifold with bonnets and adjustment holders

Manifolds for heating and cooling system are provided with:

  • Main manifold Ø1″1/4 (DN32);
  • Dual Side port Ø 1/2″, thermosetting bonnet on the back flow and delivery flow holder;
  • Side plant connections Ø1, flat sealing and with cap arranged on one of the two sides;
  • A pair of side caps brass Ø1 “with O-ring seal; insulation shells in PE 15 mm thickness available on demand;
  • connections Ø3 / 4 “Eurokonus on system side, wheelbase 50mm;

Manifolds with bonnets and flow meters regulators

 

  • Main manifold Ø1″1/4 (DN32);
  • Dual Side port Ø 1/2″, thermosetting bonnet on the back flow and delivery flow holder;
  • Side plant connections Ø1, flat sealing and with cap arranged on one of the two sides;
  • Pair of side caps brass Ø1 “with O-ring seal;
  • Wall fixing kit or with box with fixing steel collar
  • Insulation PE shells thickness 15 mm available on demand;
  • Connections Ø3 / 4 “Eurokonus on system side, wheelbase 50m

Accessories

Distribution manifolds for heating and cooling system can be complemented with a wide range of accessories

  • Insulation shells
  • electro thermal actuator
  • Couple valves with thermometers
  • Swivel connection with soft seal
  • Adapter fittings for multilayer pipe of different thickness and copper pipes
  • Containment built-in boxes or containment external boxes.