Vertical hydraulic separator with inertial tank for wall installation in stainless steel AISI 304.
Compatible with CS80 and CS125 DN25 manifolds or for standalone installation.
EQUICOLL X features internal pipeworks that makes it ideal for use with heat pumps for heating and cooling, ensuring perfect balancing of flows between the primary and secondary circuits. EQUICOLL X is extremely flexible in installation, depending on system requirements, it can be installed upward or downward and to the right or left of distribution groups.
- Stainless steel tank;
- PLUG&PLAY installation with CS80 and CS125 DN25 systems;
- Wall mounting brackets.
The supply includes:
- Separator/Tank;
- Drain valve, an automatic air vent valve with an isolation fitting, a safety valve set at 3 bar, and a pressure gauge;
- 20 mm thick PE insulation.
Performance
- Nominal flow rate = 3 m3/h – max 4.5 m3/h;
- Maximum power = 50 kW HEATER;
- Maximum power = 18 kW HEAT PUMP.
Capacity
- EQUICOLL X 20 – 20 liters
- EQUICOLL X 50 – 45 liters
GENERAL TECHNICAL DATA
- Operating Temperature Range: +5 °C /+80 °C
- Maximum Operating Pressure: 3 bar
- Fittings: IN/OUT 1″ 1/2 F SP
- Fluids: water – water/glycol mixtures (max 30%)
Materials
- Separator/tank: Stainless Steel AISI 304
- Fittings: Brass UNI EN 12164 – CW614N
- Insulation: PE 20 mm, Dens. 60 Kg/m3,
- Thermal Conductivity 0.04 W/mK
|
REF. EQUICOLL X |
X 20 |
X 45 |
|
A |
180 |
340 |
|
Packaging L x B x H (mm) |
750 x 400 x 250 |
750 x 400 x 400 |
|
Packaging weight (kg) |
18.00 |
25.00 |
*The separator can also be installed rotated by 180 degrees.
PRODUCT LIST
|
DESCRIPTION |
CODE |
|
EQUICOLL X 20 – AISI 304 |
332004 |
|
EQUICOLL X 50 – AISI 304 |
332002 |
ACCESSORIES LIST
|
REF. |
DESCRIPTION |
CODE |
|
1 |
WALL-HUNG BRACKET FOR EQUICOLL-S 20L (1 PC.) |
940650 |
|
WALL-HUNG BRACKET FOR EQUICOLL-IN 45L (1 PC.) |
940651 |
|
|
2 |
RED ISOLATION VALVE KIT Ø 1” F X 1” 1/2 F (1 PC.)* |
712106 |
|
3
|
BLUE ISOLATION VALVE KIT Ø 1″ F X 1″ 1/2 F WITH CHECK VALVE (1 PC.)* |
712110 |
|
BLUE ISOLATION VALVE KIT Ø 1″ F X 1″ 1/2 F WITHOUT CHECK VALVE (1 PC.)* |
712115 |
|
|
|
BLACK ISOLATION VALVE KIT Ø 1″ F X 1″ 1/2 F (1 PC.)* |
712107 |
|
4 |
ISOLATION VALVE SHELL KIT Ø 1” F / 1” 1/4 F X 1” 1/2 F (1 PC.) |
903040 |
|
5 |
FITTINGS KIT Ø 1” 1/2 M X 1” F (2 PC.)*** |
903031 |
|
6 |
7 C INSULATION KIT (1 PC)** |
662223 |
|
7 |
EQUICOLL SENSOR KIT (1 PC.) |
903075 |
* The use of fitting kit code 903031 is recommended to be paired with this product.
** The supply includes insulating material for the installation of the product in cooling applications.
*** It is recommended to use fittings to directly connect the product to the plant’s pipelines (if isolation valves are used).
