CS80 DN25 mixed distribution group with electrical regulation.
Suitable for heating and cooling systems, CS80 FIXED POINT GROUP is supplied with closed-cell expanded PE, removable and inspectable with a convenient Velcro closure. Designed to be paired with CS80 distribution manifolds, it ensures efficient circulation in modern systems, facilitating heat exchange between the heat generator and the system by electrically actuating temperature settings. Installed on a distribution manifold downstream of boilers or heat pumps, in combination with hydraulic separators and tanks from chapter 1, it manages the distribution in the secondary circuits of heating or cooling systems. Used individually with the range of accessories, it allows for multiple applications. CS80 MIXED GROUP is an ideal solution in reduced room for installation or in wall-hung applications. CS80 MIXED GROUP comes with Ø 6mm temperature probe, maximum lenght 40mm.
Supplied with three variants of electric actuators with regulation:
- MIX 230: 3 points (common/open/close – SPDT), power supply 230V;
- MIX 24V 0-10V: Proportional with 0-10V signal, power supply 24V;
- MIX FIX 230V: On-board electronics, to maintain the set fixed temperature, with hot/cold supply sensor and control display;
The supply includes:
- Pump unit with circulator;
- 15 mm thickness PE insulating shell
Performance
- Nominal flow rate = 2 m3/h – max 2.5 m3 /h;
- Max power = 25 kW RADIATORS;
- Max power = 12 kW RADIANT/VENTIL.
GENERAL TECHNICAL DATA
- Operating temperature range: +5 °C /+80 °C
- Maximum operating pressure: 6 bar
- Connections: IN 1″ 1/2 M SP (manifold) – OUT 1″ F (system)
- Fluids: water – water/glycol mixtures (max 30%)
- Mixing valve Kv: 6
Materials
- Pipes: Stainless steel AISI 304
- Fittings: Brass UNI EN 12164 – CW614N
- Hydraulic seals: EPDM
- Insulation: PE 15mm, Dens 60 kg/m3, T. conduct. 0,04 W/mK
PRESSURE LOSS
|
REF. MIX GROUP |
PARA 25/6 |
PARA 25/8 |
|
A |
153 |
153 |
|
Packaging L x B x H (mm) |
355 x 195 x 200 |
355 x 195 x 200 |
|
Packaging Weight (kg) |
5.30 |
5.60 |
Product list
|
DESCRIPTION |
CODE |
|
CS80 230V 3P LEFT MIX GROUP – PARA 25/6 |
522003 |
|
CS80 230V 3P LEFT MIX GROUP – PARA 25/8 |
522013 |
|
CS80 24V 0-10V LEFT MIX GROUP – PARA 25/6 |
522004 |
|
CS80 24V 0-10V LEFT MIX GROUP – PARA 25/8 |
522014 |
|
CS80 230V LEFT MIX FIX GROUP – PARA 25/6 |
522005 |
|
CS80 230V LEFT MIX FIX GROUP – PARA 25/8 |
552015 |
|
CS80 230V 3P RIGHT MIX GROUP – PARA 25/6* |
522033 |
|
CS80 230V 3P RIGHT MIX GROUP – PARA 25/8* |
522043 |
|
CS80 24V 0-10V RIGHT MIX GROUP – PARA 25/6* |
522034 |
|
CS80 24V 0-10V RIGHT MIX GROUP – PARA 25/8* |
522044 |
|
CS80 230V RIGHT MIX FIX GROUP – PARA 25/6 * |
522035 |
|
CS80 230V RIGHT MIX FIX GROUP – PARA 25/8 * |
522045 |
ACCESSORIES LIST
|
REF. |
DESCRIPTION |
CODE |
|
1 |
NICKELED BRASS UNION FITTING KIT Ø 1” F x 1” 1/2 F (2 PC.) |
903005 |
|
Nickeled brass Union fitting kit Ø 1” 1/4 M x 1” 1/2 F (2 Pc.) |
903006 |
|
|
2 |
WALL FIXING BRACKET KIT FOR CS80 GROUP (1 PC.)** |
940653 |
*IMPORTANT NOTES FOR ORDERS:
• Right direct “DX” distribution groups should be ordered only in exceptional cases and with 1+1 or 2+2 distribution manifolds;
• They cannot be used in cooling systems with fluid temperatures < 15°C;
**Wall-hung brackets for installation of single group.
